24 Port Gigabit PoE Switch

About this item

* 24 × 10 Mbps/100 Mbps/1 Gbps/25 Gbps RJ45 ports
* With four POE++ ports, transfers data and power on one single cable
* Works with IEEE 8023af/at/bt compliant PDs
* 8021p/DSCP QoS enable smooth latency-sensitive traffic
* Supports PoE Power up to 60 W for each PoE++ port
* Supports PoE Power up to 123 W for all PoE ports*
* PoE Auto Recovery guarantees stable operation of PoE devices by automatically rebooting the dropped or unresponsive PD devices

A 24-port Gigabit PoE switch is a networking device that integrates 24 Gigabit Ethernet ports with Power over Ethernet (PoE) capabilities, enabling simultaneous data transmission and power supply to connected devices (e.g., IP cameras, wireless access points, VoIP phones) via Ethernet cables. Its Gigabit ports ensure high-speed data transfer, making it ideal for applications like HD surveillance, high-density wireless networks, and IoT deployments.

Key Technical Features

1. PoE Standards Support

• IEEE 802.3af: Up to 15.4W per port (for low-power devices like basic IP cameras).

• IEEE 802.3at (PoE+): Up to 30W per port (supports PTZ cameras, high-performance APs).

• IEEE 802.3bt (PoE++): Up to 60W per port (for advanced devices like LED lighting or dual-band APs).

2. Port Configuration

• 24x Gigabit RJ45 PoE ports for end-device connectivity.

• 2–4x Gigabit/10G SFP optical ports for fiber uplinks, enabling long-distance or high-bandwidth backbone connections.

3. Performance Metrics

• Switching Capacity: 336 Gbps to 1.28 Tbps (handles full-duplex traffic without congestion).

• Packet Forwarding Rate: 51 Mpps to 126 Mpps (ensures low latency for real-time applications).

4. Management Options

• Managed Switches: Support SNMP, Web, CLI, Telnet for advanced configuration (VLANs, QoS, ACLs, STP/RSTP/MSTP).

• Unmanaged Switches: Plug-and-play, suitable for small networks with minimal setup requirements.

5. Security Features

• DHCP Snooping, IP-MAC-Port Binding, 802.1X Authentication: Prevent unauthorized access.

• ARP Protection, DoS Defense: Mitigate network attacks.

6. Energy Efficiency

• Smart Fan Control: Adjusts fan speed based on temperature.

• Port Power-Saving: Automatically powers down idle ports.

• EEE (Energy-Efficient Ethernet): Reduces power consumption during low-traffic periods.

Typical Applications

1. Video Surveillance

• Powers and connects 24 HD IP cameras for large-scale monitoring (e.g., warehouses, campuses).

2. Wireless Networks

• Deploys multiple Wi-Fi 6/6E access points for high-density coverage in stadiums or offices.

3. VoIP Communications

• Ensures stable power and data for IP phones in enterprise environments.

4. Smart Buildings

• Integrates IoT devices (e.g., sensors, smart locks) into a unified network.

FANGBE switch is an unmanaged 24-Port Power over Ethernet Switch with a total of 52 watts of PoE power. All ports run at 10/100Mbps and can provide up to 30W per port through the IEEE 802. 3af/at standard.

Specifications:
PoE Power: Single port's PoE power reaching 30W, total output power up to 52W.
AI Watchdog: Automatically detect and recovery the POE devices which are no response or go offline, no manual operation and more convenient maintenance.
Plug and Play: No need for any setup, plug and play, easy to use. Flexibly expand home and office network.

AI 250 meters Extend function: Up to 250 meters transmission distance at 10Mbps data speed.

Please Note:

Theoretically, the PSE device interface can detect the PD automatically when the PD is connected. If the power is insufficient to provide the required power for PD, the PD will not get powered. Make sure the power for running the PDs will not exceed the power budget of the PoE network switch. Limit the per-port current at safe levels and use the extra PSE devices if needed.

Orders not noted, this product will be shipped according to European regulatory standards!